Home /
Ebike Hub Motor Wheel Conversion Kit /
Voilamart Electric Bicycle Conversion Kit 48V 1000W Ebike 26" 135mm Rear Hub Motor Wheel Kit E-Bike Conversion Kit for Turn Pedal Bike into Ebike

Voilamart Electric Bicycle Conversion Kit 48V 1000W Ebike 26" 135mm Rear Hub Motor Wheel Kit E-Bike Conversion Kit for Turn Pedal Bike into Ebike

More Views

Voilamart Electric Bicycle Conversion Kit 48V 1000W Ebike 26" 135mm Rear Hub Motor Wheel Kit E-Bike Conversion Kit for Turn Pedal Bike into Ebike

Be the first to review this product

Only free shipping for some areas where is not far away from our warehouse. If the address is too far, the customer service may contact for extra postage!
This item is only available in US, FOR OTHER COUNTRIES WOULD NEED ADDITION SHIPPING FEE!!!

【POWERFUL 1000W BRUSHLESS MOTOR】-The 48V 1000W Ebike Rear Wheel Conversion Kit features a powerful brushless gearless hub motor. It runs efficiently and quietly. The max speed can reach 28mph (45km/h). It universal fits any 26IN bike frame with 3.94IN/100mm front fork dropout.
【SAFE & DURABLE】-CE, EN15194 approved, ensures safety and quality. Motor power cut-off function of the brake levers prevent the motor from overheating and saving energy. Smoother bearing & 27mm Magnet Steel used in the Hub Motor, ride further with our Ebike Kit.
【POWER DISPLAY INTEGRATED ON THROTTLE】-The twist throttle ensures speed control is fast and simple, and power display integrated on it, takes less handlebar space. The aluminum alloy double wall rim is durable and stable, it can hold up to 330lbs/150kg.
【Road-legal Ebike Conversion Kit】-Restricted to 750W and 24mph (38km/h) speed by default as a road-legal electric bike conversion kit, but you could also switch into 1000W full power output for off-road mode by simply disconnect the blue cable, would brings 28mph (45km/h) speed.
【PEDAL ASSIST SYSTEM】The PAS function of this e bike conversion kit allows you to switch 3 riding modes between Throttle / PAS / Manual. The suitable riding mode can be switched as needed. Less fatigue and more comfortably, great for long trips. Equipped detailed assembly instruction and video,7 X 24H customer service, help you complete the assembly easily.

Availability: In stock

$199.99

Qty:

-OR- -OR-

Product Description
Additional Information
Tags (0)
Reviews (0)
Questions (0)

Product Description

Motor Electrico Para Bicicleta

Electric Bicycle Hub Motor Rear Wheel Kit

Key feature:

* CE, EN15194 approved

* Restricted to 750W and 38km/h by default as a road-legal kit

* Nylon tire & alloy rim & stainless steel spoke

* Rare-earth metal magnet are used in the motor to efficiently produce large power

* Aluminum alloy powerful controller supports big current supply

* Twist throttle has battery level display and power-cut off button

* Brake Levers cut off the power supply to the motor safely

* Crank speed sensor for pedal assist

Upgraded Intelligent Motor Controller:

* Allow you to swap two power modes between the full 1000W power or 750W power by a single blue switch wire is embedded in controller. (Only for Twist Throttle)

* Still remain the full 1000W power with no speed control.(Only for Pedal Assist System,"PAS")

Specification

Wheel type: 26 inches Brushless Gearless Rear Hub Motor Wheel

Tire: Nylon 1.25"~2.125" tire wire awailable, but need to fits your bike frame.

Rim: Alloy double wall Torque: 45 N.M

Spokes: Steel, 12G x 2.6mm

Axel Length 210mm x Dia 10mm, 135mm Dropout

Max load capacity: 330-440lb / 150-200kg

Net weight: 22lb / 10kg

Power Cord Length: 95cm

Mode 1 Power: 750W / 48V ; Max speed: 24mph / 38 km/h

Mode 2 Power: 1000W / 48V ; Max speed: 28mph / 45 km/h

Note:

1. Battery and charger are not included in package.

2. The system requires a 48 Volt electrokinetic cell battery with a nominal capacity not less than 11.6Ah.

3. The US regulations dictate that a kit must not exceed the rated power of 750W to be road-legal.

Caution: For your Safety, Please turn off the battery before connecting the Controller！

Electric Bicycle Hub Engine Rear Wheel Kit


Powerful Hub Motor 48V 1000W Powerful brushless gearless motor with 28mph (45km/h) speed; Restricted to 750W and 24mph (38km/h) speed by default as a road-legal pedal bike conversion kit. Built in motor design make the efficiency of this hub motor wheel conversion kit for electric bicycle not less than 82%, would much higher but less wear than other type (mid drive or friction type).	Bike Rear Wheel Conversion Kit Pedal Assistance System (PAS): enjoy cycling while driving electric bike with 330-440LB / 150-200KG Max Load Capacity.	Parts design for E-bike The two Ebike Brake Levers are both "brake and cut-off-power" design, please check both the brake levers is install correctly and return to "unbrake state" if the system can turn on but no power to the wheel. The twist throttle design for electric bike has an integrated battery power display and on/off button, a minimalist design that brings the handlebar a more organized look after modify, yet keeps the status of your DIY E-bike in front of you.

E Bike Conversion Kit


Comes with all the components you need to a full conversion Including: Rear Wheel(of 7 speed sprocket and 2mm freewheel spacer), Motor Controller, Controller Bag, Pedal Assist Crank Sensor, One Pair of Brake Handles and Twist Throttle, Cable Ties & Plastic Coil, Manual. Note: Battery not included Please put the freewheel spacer to the thread before install the freewheel!	Dual Mode Ebike Controller Motor works under Hall effect and non-Hall effect, extend life for electric bike	Package Includes 1x Brushless Gearless Motor Rear Wheel 1x Intelligent Motor Controller 1x Pedal Assist Crank Sensor 1x Cable Ties & Plastic Coil 1x Pair of Handle Bars (included Twist Throttle) 1x Controller Bag 1x Pair of Brake Handles 1x Manual

Electric Bike Rear Wheel Hub Motor Kit

Some of the more common problems and their usual solutions

Q1, The wheel turns with resistance but I still can turn it:

A1, Two reason might due to this situation, the brake(A1.1) and the motor wire(A1.2).

A1.1, Release the brake and try to turn the hub motor wheel again, and if the resistance gone, the problem solved, if still there, try A1.2 please;

A1.2, There are 3 color wires to control the hub motor: yellow, green and blue, it will generate the resistance while they touch with any other one and make a shortcut, you can try to make them stay alone, and keep them from touching each other via wrap the metal contacts by the green hose or extra insulating tape.

Q2, The wheel turns reverse:

A2, Maybe there's a wrong wiring between the motor control wires, you can try swapping the green and yellow hub motor wires and checking that the motor is still spinning in reverse. You can just ride like that wiring if the problem solved, but if not, please send us your order number, photo(s) about the wiring, and the motor number on the hub motor, we'd like to solve your problem.