Search results for 'IND-CV-R2-FBA US'
-
Voilamart 26" Waterproof Electric Bicycle Rear 135mm Hub Motor Wheel Conversion Kit 48V / 52V 1200W with LCD Display Meter IP65
$255.99 As low as: $238.69* Only free shipping for some areas where is not far away from our warehouse. If the address is too far, the customer service may contact for extra postage!
* This item is only available in US, it can't be sent to any other countries!!!
- 【POWERFUL BRUSHLESS REAR HUB MOTOR】-The Voilamart Waterproof Ebike Conversion Kit 48V 1200W Rear Hub Motor Wheel features a powerful brushless gearless hub motor, 30mm Magnet Steel inside brings 34mph (55km/h) max speed. This Waterproof Electric Bicycle Conversion Kit universal fits any 26IN bike with 5.31IN/135mm rear dropout spacing.
- 【SAFE & DURABLE】-CE, EN15194 approved, Restricted to 750W and 24mph (38km/h) speed by default as a Road-legal Ebike Kit, but still could switch into 1200 Watt full power for off-road riding by disconnect the road-legal cable. Brake & cut-off power design, Dia 1.73IN (44mm) Brake Disc Base fits dual size disc, ensures quality & riding safety. Detailed assembly instruction and video equipped.
- 【M5 LCD Display Riding Information】 -Shows all riding info front of you: battery power, riding speed, PAS level, mileage & etc., it could also shows the error code while any problem brake in & help to locate it and fix it. The Waterproof Thumb Throttle ensures speed control is fast and simple. Aluminum alloy double wall rim & 36Pcs 12G x 2.6mm Steel Spoke, 440LB (200KG) Max Load awailable.
- 【Waterproof Brake Sensor Upgraded】 -The Waterproof Ebike Brake Sensor replaces the traditional electric bicycle brake handle, no longer need to replace the one on your bike you're used to, and make this Ebike Hub Motor Wheel Kit can fit with both Linear Pull & Hydraulic Disc Brake. Stronger controller can fits 48~52 volt power, ride further, faster with our Ebike Kit.
- 【Half-separate Type 12 Magnet Pedal Assist Sensor Includes】 -Half-separate design magnet plate make it easier install the PAS to your bike and no longer need to remove the crank arm! 12 Magnet on the plate make it respone faster than others. Throttle / PAS / Manual, 3 riding modes awailable, less fatigue and more comfortably. 2Pcs Set Torque Arm (L + R) in package, no need to purchase separatly.
-
QA-Troubleshoot about the ebike kit system couldn't turns on
$0.01Step1, Checking the voltage of the battery, the 36V battery would shows about 41 volt, and the 48V battery would shows about 50~52 volt;
Learn More
Step2, Checking the connector between controller and On/Off switch part (usually the throttle or LCD monitor), check if the pins of male plug side has been crooked.
If above 2 has been checked and looks ok, then should consider it's the issue about controller or (and) throttle been broken or burnt out. -
Voilamart 48V 2000W 26IN Electric Bicycle 135mm Rear Hub Motor Wheel 0.75'' Width Rim (Motor Wheel Only)
$356.72- Power: 2000W / 48V
- Wheel type: Rear Wheel 135mm Dropout (fits freewheel, not for cassette)
- Send from China
-
Voilamart 26" Waterproof Electric Bicycle Rear 135mm Hub Motor Wheel Conversion Kit 48V / 52V 1200W with LCD Display Meter IP65 With 16AH Battery
$452.99 As low as: $422.69* Only free shipping for some areas where is not far away from our warehouse. If the address is too far, the customer service may contact for extra postage!
* This item is only available in US, it can't be sent to any other countries!!!
- 【POWERFUL BRUSHLESS HUB MOTOR】-The Voilamart Waterproof Ebike Conversion Kit 48V 1200W Hub Motor Wheel features a powerful brushless gearless hub motor, 30mm Magnet Steel inside brings 34mph (55km/h) max speed. This Waterproof Electric Bicycle Conversion Kit universal fits any 26IN bike with 3.94IN (100mm) front dropout / 5.31IN (135mm) rear dropout spacing.
- 【SAFE & DURABLE】-CE, EN15194 approved, Restricted to 750W and 24mph (38km/h) speed by default as a Road-legal Ebike Kit, but still could switch into 1200 Watt full power for off-road riding by disconnect the road-legal cable. Brake & cut-off power design, Dia 1.73IN (44mm) Brake Disc Base fits dual size disc, ensures quality & riding safety. Detailed assembly instruction and video equipped.
- 【M5 LCD Display Riding Information】 -Shows all riding info front of you: battery power, riding speed, PAS level, mileage & etc., it could also shows the error code while any problem brake in & help to locate it and fix it. The Waterproof Thumb Throttle ensures speed control is fast and simple. Aluminum alloy double wall rim & 36Pcs 12G x 2.6mm Steel Spoke, 440LB (200KG) Max Load awailable.
- 【Waterproof Brake Sensor Upgraded】 -The Waterproof Ebike Brake Sensor replaces the traditional electric bicycle brake handle, no longer need to replace the one on your bike you're used to, and make this Ebike Hub Motor Wheel Kit can fit with both Linear Pull & Hydraulic Disc Brake. Stronger controller can fits 48~52 volt power, ride further, faster with our Ebike Kit.
- 【Half-separate Type 12 Magnet Pedal Assist Sensor Includes】 -Half-separate design magnet plate make it easier install the PAS to your bike and no longer need to remove the crank arm! 12 Magnet on the plate make it respone faster than others. Throttle / PAS / Manual, 3 riding modes awailable, less fatigue and more comfortably. 2Pcs Set Torque Arm (L + R) in package, no need to purchase separatly.
-
-
-
Voilamart 26IN Electric Bicycle Front 100MM Hub Motor Wheel 48V 1500W Conversion Kit with SW900 LCD Display Monitor Intelligent Controller PAS 750W Restricted as Road Legal Turn Bike Into eBike Kit
$445.69 As low as: $428.69【POWERFUL 1500W BRUSHLESS MOTOR】-The 48V 1500W Ebike Rear Wheel Conversion Kit features a powerful brushless gearless hub motor. It runs efficiently and quietly. The max speed can reach 34mph (55km/h) . It universal fits any 26IN bike frame with 3.94IN/100mm FRONT dropout spacing.
【SAFE & DURABLE】-CE, EN15194 approved, ensures safety and quality. Motor power cut-off function of the brake levers prevent the motor from overheating and saving energy. Smoother bearing & 30mm Magnet Steel used in the Hub Motor, ride further with our Ebike Kit.
【LCD Display Riding Information】-Shows all riding info front of you: riding speed, battery power, PAS level, etc. The twist throttle ensures speed control is fast and simple. The aluminum alloy double wall rim is durable and stable, it can hold up to 330lbs/150kg.
【Road-legal Ebike Conversion Kit】-Restricted to 750W and 24mph (38km/h) speed by default as a road-legal electric bike conversion kit, but you could also switch into 1500W full power output for off-road mode by simply disconnect the blue cable, would brings 34mph (55km/h) speed.
【PEDAL ASSIST SYSTEM】The PAS function of this e bike conversion kit allows you to switch 3 riding modes between Throttle / PAS / Manual. The suitable riding mode can be switched as needed. Less fatigue and more comfortably, great for long trips. Equipped detailed assembly instruction and video,7 X 24H customer service, help you complete the assembly easily.
Learn More -
Voilamart 20'' ( 406 ) 48V 1000W Ebike 100mm Dropout Front Hub Motor Wheel Electric Bicycle Conversion Kit with LCD Monitor
$368.09* Built to the highest international standards, CE, EN15194
Learn More
* 48V 1000W and 750W super power brushless gearless hub motor
* Restricted to 750W and 24 mph by default as a road-legal kit
* Nylon tire& alloy rim& galvanized steel spoke
* Rare-earth metal magnet are used in the motor to efficiently produce large power
* Aluminum alloy powerful controller guarantee big current supply
* Twist throttle has battery level display and power-cut off button
* Brake Levers cut off the power supply to the motor safely
* Crank speed sensor for pedal assist
* Aluminum alloy powerful controller -
Voilamart Electric Bicycle Conversion Kit 48V 1000W Ebike 26" 135mm Rear Hub Motor Wheel Kit E-Bike Conversion Kit for Turn Pedal Bike into Ebike
Regular Price: $395.69
Special Price $368.69
- Only free shipping for some areas where is not far away from our warehouse. If the address is too far, the customer service may contact for extra postage!
- This item is Sending From China, Please Confirm the shipping fee with customer support team.
- 【POWERFUL 1000W BRUSHLESS MOTOR】-The 48V 1000W Ebike Rear Wheel Conversion Kit features a powerful brushless gearless hub motor. It runs efficiently and quietly. The max speed can reach 28mph (45km/h). It universal fits any 26IN bike frame with 3.94IN/100mm front fork dropout.
- 【SAFE & DURABLE】-CE, EN15194 approved, ensures safety and quality. Motor power cut-off function of the brake levers prevent the motor from overheating and saving energy. Smoother bearing & 27mm Magnet Steel used in the Hub Motor, ride further with our Ebike Kit.
- 【POWER DISPLAY INTEGRATED ON THROTTLE】-The twist throttle ensures speed control is fast and simple, and power display integrated on it, takes less handlebar space. The aluminum alloy double wall rim is durable and stable, it can hold up to 330lbs/150kg.
- 【Road-legal Ebike Conversion Kit】-Restricted to 750W and 24mph (38km/h) speed by default as a road-legal electric bike conversion kit, but you could also switch into 1000W full power output for off-road mode by simply disconnect the blue cable, would brings 28mph (45km/h) speed.
- 【PEDAL ASSIST SYSTEM】The PAS function of this e bike conversion kit allows you to switch 3 riding modes between Throttle / PAS / Manual. The suitable riding mode can be switched as needed. Less fatigue and more comfortably, great for long trips. Equipped detailed assembly instruction and video,7 X 24H customer service, help you complete the assembly easily.
- Please know that this item will sending out at about Feb.15th due to manufactorer in holiday.
-
VoilamartQA, How to install the Linerpull Bike Brake
$0.06Step 1: You can put the brake lever over the handlebar, and then screw the retaining ring screw halfway-tight (able to be turned, but with a damping when turning, for subsequent adjustment of the angle of the brake handle to make the brakes more comfortable) by hexagonal screwdriver or Phillips screwdriver(fits with the brake lever's screw); Step 2: Then hang the hammer head of the brake cable to the innner side of the lever, and unscrew the Brake Cable Adjustment Screw from the brake lever by about 3~5mm. Step 3: Then squeeze the brake clamp by hand, make the brake clamp catch the bike wheel, then pull the brake cable tightly, and fix the brake cable on the clamp side. Step 4, then you can screw the Brake Cable Adjusting Screw mentioned in step 2 into brake lever, to loosen the brake clamp from the wheel. Step 5: Adjust the brake lever into a more comfortable grip angle, and then continue to tighten the retaining ring screws that were half-tightened in step 1, Done. Learn More